Samsung iDCS 500 Programming Manual page 80

iDCS 500
TECHNICAL MANUAL
MMC: 219
DESCRIPTION:
This MMC is used to print a traffic report and select options. The traffic report can
be printed upon demand, every hour, at a programmed time of each day, or up to
three separate timed shifts. Automatic printing will always clear the totals.
NOTE: Traffic Reporting is only available on a iDCS 500 system with a LAN module
installed on the MCP card.
When MANUAL PRINTOUT is selected, the options are:
• PRINT AND CLEAR: A report is printed and all totals are reset to 0.
• PRINTOUT ONLY: A report is printed and all the totals are saved.
• CANCEL PRINTOUT: The program can be exited here if no report is needed.
When AUTO PRINT OPTN is selected, the options are:
• AUTO PRINT OFF:
• DAILY HHMM:2359
• EVERY HOUR MM:00
• THREE TIME SHIFT:
When a report is printed, the totals represent call statistics accumulated from the
date of the last report stated as BEGINNING: D & T up to the date of this printout
stated as ENDING D & T. See the sample report at the end of this MMC.
If there are no trunks in a group, the trunk group report for that group will not print.
PROGRAM KEYS
This MMC programming sequence is designed to be used by the end user and
does not require the usual programming key strokes.
TRAFFIC REPORT PRINTOUT
Reports are not automatically printed.
A report is printed at this programmable time every day
and all the totals are reset to "0."
A Traffic report will be printed every hour at this time
Up to three separate Start and End times may be
programmed to report traffic within certain times of a day.
A report is printed at the end of each End time and all
totals are reset to "0."
PROGRAMMING
PART 2 AUGUST 2002
HOME
PAGE
Table of
Contents
HELP