Samsung iDCS 500 Programming Manual page 413

iDCS 500
TECHNICAL MANUAL
ALM
ALARM
CODE
MJD02 Sync Recovery
MJD03 Red Alarm
MJD04 Red Alarm Rec
MJD05 Yellow Alarm
MJD06 Yellow Alarm Rec
MJD07 Blue Alarm
MJD08 Blue Alarm Rec
MJD09 Bit Error Alarm
MJD10 NTWRK Event
MJD11 SPID Init Error
MJD12 SPID Init Rec
MJD13 LPBK Error
MJD14 LPBK Recovery
MJD15 BRI DL Unavail
MJD16 BRI DL Recovery
MMC: 851
DEFINITION
Clocking on TEPRI cards has become synchronous.
Locally detected loss of PCM carrier on TEPRI card for more
than 250 ms.
Alarm data = Cabinet, Slot (Cx-Syy)
PCM carrier detected locally on TEPRI cards.
Alarm data = Cabinet, Slot (Cx-Syy)
Remotely detected failure transmitted in frame on TEPRI card.
Alarm data = Cabinet, Slot (Cx-Syy)
Remotely detected failure restored transmitted on TEPRI card.
Alarm data = Cabinet, Slot (Cx-Syy)
All one's being transmitted on facility on TEPRI card.
Alarm data = Cabinet, Slot (Cx-Syy)
A blue alarm condition has been cleared.
Alarm data = Cabinet, Slot (Cx-Syy)
Alarm is activated when the error rate exceeds 1x10-6 errors.
Note: 1x10-6 is threshold for minor alarm, 1 x 10-3 is threshold
for major alarm errors on E1, PRI or BRI.
Alarm data = Cabinet, Slot (Cx-Syy)
An Implausible event has occurred on the PRI or BRI Network
digital line. Protocols do not match or subscriber ID mistmatch.
Alarm data = Cabinet, Slot (Cx-Syy)
The BRI received an error from the network.
Alarm data = Cabinet, Slot, Channel (Cx-Syy-czz)
The BRI has recovered from an error on the network.
Alarm data = Cabinet, Slot, Channel (Cx-Syy-czz)
Internal on demand loopback failed.
Alarm data = Cabinet, Slot, Channel (Cx-Syy-czz)
Internal on demand loopback test passed.
Alarm data = Cabinet, Slot, Channel (Cx-Syy-czz)
A BRI data link is out of service.
Alarm data = Cabinet, Slot, Channel (Cx-Syy-czz)
A BRI data link is back in service.
Alarm data = Cabinet, Slot, Channel (Cx-Syy-czz)
PROGRAMMING
PART 2 AUGUST 2003
HOME
PAGE
Table of
Contents
HELP