Samsung iDCS 500 Programming Manual page 401

iDCS 500
TECHNICAL MANUAL
• H.245 TUNNELING: This protocol enables outband signaling between the near
end and the far end. Two options added. ENABLE and DISABLE.
• WARNING DESTINATION: The Warning Destination is a station within the
calling ITM side. This is a destination that an ITM call will redirect to in the case
of the far end point destination not being available or the network is inoperable.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ACTION
1. Press TRSF 834 Display shows the first
option. Press UP or DOWN key to select an
option
OR
2. Press RIGHT soft key to move cursor. Press
UP or DOWN key to select an entry
3. Press RIGHT soft key to enter data and move
cursor
4. Press UP or DOWN key to select an option
OR
Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: H.323 FAST SETUP: ENABLE
GW CALL ID:= 1234
BILLING TYPE: STANDARD
CALLER ID TYPE: ANI
INCOMING CHANNEL: DISTRIBUTED
DTMF GENERATION: H245 SIGNAL
FAX SIGNALLING TYPE: T.38
SWITCH TO H.245: ENABLE
DEFAULT DIL: NONE
SNMP SERVER: 0.0.0.0
SIGNALLING PORT: 10000
STATUS PORT: 20000
MMC: 834
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
PROGRAMMING
PART 2 SEPTEMBER 2003
DISPLAY
H.323 FAST SETUP
ENABLE
H.323 FAST SETUP
ENABLE
H.323 FAST SETUP
ENABLE
GATEWAY CALL ID
1234
HOME
PAGE
Table of
Contents
HELP