Samsung iDCS 500 Programming Manual page 365

iDCS 500
TECHNICAL MANUAL
MMC: 803
DESCRIPTION:
Allows the assignment of tenant groups on a per-cabinet, slot and port basis. The
simple rule is Cabinet-Slot-Port=Tenant. The simplicity of this program allows for
flexible assignments. The only information needed is the correct correlation of
entries.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ACTION
1. Press TRSF 803
Display shows
2. Enter cabinet number if no change press
RIGHT soft key to move cursor
3. Enter slot number if no change press RIGHT
soft key to move cursor
4. Enter port number if no change press RIGHT
soft key to move cursor
5. Enter tenant number if no change press
RIGHT soft key to return to step 2
6. Press TRSF to store and exit
OR
Press SPK to store and advance to next
MMC
DEFAULT DATA: ALL ASSIGNMENTS TENANT 1
RELATED ITEMS: TENANT GROUP
ASSIGN TENANT GROUP
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
PROGRAMMING
PART 2 NOVEMBER 2001
DISPLAY
TENANT GROUP
C:1 S:1 -:01 T:1
TENANT GROUP
C:1 S:1 -:01 T:1
TENANT GROUP
C:1 S:1 -:01 T:1
TENANT GROUP
C:1 S:1 -:01 T:1
TENANT GROUP
C:1 S:1 -:01 T:1
HOME
PAGE
Table of
Contents
HELP