Samsung iDCS 500 Programming Manual page 200

iDCS 500
TECHNICAL MANUAL
2. Dial tone number from above list (0–9, e.g., 9)
OR
Press UP or DOWN key to select tone, press
LEFT soft key and advance to step 3
3. Dial tone option 0 for CONTINUOUS or
1 for INTERRUPT
OR
Press UP or DOWN key to select tone
control and press RIGHT soft key to advance
to step 4
OR
Press LEFT soft key to return to step 2
4. Dial new value for interrupt times (must be
four digits)
Press RIGHT soft key advances cursor
Press LEFT soft key retreats cursor
If valid entry, system returns to step 2
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: SEE BELOW FOR CADENCES. BY DEFAULT DIAL TONE AND
MESSAGE WAIT TONE ARE CONTINUOUS.
TONE
0 BUSY TONE
1 CONFIRM/BARGE-IN TONE
2 DIAL TONE
3 DND/NO MORE TONE
4 ERROR TONE
5 HOLD/CAMP-ON TONE
6 MESSAGE WAIT TONE
7 RING BACK TONE
8 RING TONE
9 TRANSFER TONE
10 DID RINGBACK TONE
NOTE: All times are in milliseconds.
RELATED ITEMS: NONE
MMC: 506
TRSFER TONE
INTERRUPT TONE
TRSFER TONE
INTERRUPT TONE
TRSFER TONE:0100
9900 0100 9900
ON OFF
500 500
50 50
1000 250
250 250
250 250
500 3500
1000 250
1000 3000
1000 3000
100 100
2000 4000
PROGRAMMING
PART 2 APRIL 2002
ON OFF
500 500
50 50
1000 250
250 250
250 250
500 3500
1000 250
1000 3000
1000 3000
100 100
2000 4000
HOME
PAGE
Table of
Contents
HELP