Samsung iDCS 500 Programming Manual page 163

iDCS 500
TECHNICAL MANUAL
MMC: 422
DESCRIPTION:
This is a Hotel / Motel software specific MMC.
In this MMC, the TRUNK COST RATE flags are entered for each trunk. DIAL PLAN
is defined in MMC 729 Rate Calculation Table. Costing Dial Plans are defined in
MMC 730. Each trunk may be defined with up to eight cost rates. Enter one or
more of the eight COST RATES per trunk. If an entry is left blank, no call costing will
be calculated for that particular DIAL PLAN.
Call type 8 is fixed for incoming. Apply a cost rate under type 8 only to a trunk if you
want incoming call costing.
Note: Call costing is only available on a iDCS 500–L/LH systems, therefore this
MMC will not be accessible on a iDCS 500–M system.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ANS/RLS
ACTION
1. Press TRSF 422
Display shows trunk number
and Cost Rate table numbers
2. Dial trunk number (e.g., 705)
OR
Press UP or DOWN to select trunk
OR
Press ANS/RLS for all
Press right soft key to move cursor
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select all
PROGRAMMING
PART 2 SEPTEMBER 2003
COST RATE
DISPLAY
[701] :12345678
CR :00000000
[705] :12345678
CR :00000000
HOME
PAGE
Table of
Contents
HELP