Samsung iDCS 500 Programming Manual page 237

iDCS 500
TECHNICAL MANUAL
MMC: 701
DESCRIPTION:
Similar to MMC 700 but does not allow a copy command. This MMC is primarily
used for creating a new class of service. If the unsupervised conference feature is
allowed, a programmed CONF key must be available to allow reentry into a
conference call. There are 30 classes of service available.
NOTE: This MMC is divided into 4 categories. The categories are USABLE
FEATURES, CALL STATION GROUPS, CALL TRUNK GROUPS, CALL TO BIVMS
STN (SVM).
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
TOLL LEVEL OPTIONS
DIAL DIGIT TOLL LEVEL
0
1
2
3
ACTION
1. Press TRSF 701
Display shows
2. Dial COS (e.g., 06)
OR
Press UP or DOWN key to select COS
Press RIGHT soft key to move cursor to toll
level
ASSIGN COS CONTENTS
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
DIAL DIGIT
A
B
C
D
PART 2 APRIL 2002
TOLL LEVEL
4 E
5 F
6 G
7 H
DISPLAY
COS CONTENTS(01)
TOLL LEVEL:A
COS CONTENTS(06)
TOLL LEVEL:A
HOME
PAGE
PROGRAMMING
Table of
Contents
HELP