Samsung iDCS 500 Programming Manual page 378

iDCS 500
TECHNICAL MANUAL
MMC: 815
DESCRIPTION:
Provides a means to copy the customer database to the SMDB (iDCS 500 Smart
Media card Data Base). This enables the on board database (SRAM) to be copied
to the SMDB and also allows the SMDB database to be copied to the on board
database. A daily save can be programmed to automatically save the on board data
base to the SMDB. This ensures that an up to date database is always available in
the case of a catastrophic failure. A daily save time of 00:00 means there is no save
performed. It is recommended to CLEAR the SMDB before the SRAM is copied to it.
When the SRAM is copied to the SMDB there is no interruption in service. If the
SMDB is copied to the SRAM the system will reset to accept the new data.
DATABASE IDENTIFICATION
SMDB
SRAM
S:mm/dd/yy hh:mm
DAILY SAVE hh:mm
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ACTION
1. Press TRSF 815
Display shows
2. Press RIGHT soft key to move cursor
3. Press UP or DOWN key to make selection
Press RIGHT soft key to move cursor
4. Press RIGHT softkey to move cursor
Press UP or DOWN key to make selection
Press RIGHT softkey to change prompt
CUSTOMER DATABASE COPY
iDCS 500 Smart Media card database
iDCS 500 MCP On-Board database
Indicates the time the database was saved to the SMDB or
the time the SRAM was last saved
The time the SRAM will be saved to the SMDB
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
PROGRAMMING
PART 2 NOVEMBER 2001
DISPLAY
CUST DBASE:SMDB
S:03/12/99 00:00
CUST DBASE:SMDB
S:03/12/99 00:00
CUST DBASE:SMDB
CLEAR SMDB: NO
CUST DBASE:SMDB
CLEAR SMDB: YES
HOME
PAGE
Table of
Contents
HELP