Samsung iDCS 500 Programming Manual page 221

iDCS 500
TECHNICAL MANUAL
MMC: 603
DESCRIPTION:
Allows the assignment of trunks to a specific trunk group or to several trunk groups.
This is very useful in the programming of LCR when more than one trunk is to be in
several dialing plans. There are two different modes of operation: (1) sequential and
(2) distribute. There are 11 programmable trunk groups in a iDCS 500-M system
with up to 99 members per group and 50 programmable trunk groups with up to 99
members per group for a iDCS 500-L system.
WARNING: One trunk can appear in more than one trunk group. If necessary,
delete the trunk member from other groups to prevent accidental access.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION
1. Press TRSF 603
Display shows
2. Enter in valid trunk group (e.g., 9, 800-848)
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to advance cursor
3. Press RIGHT soft key to change mode
OR
Press UP or DOWN key to change mode to
member
ASSIGN TRUNK GROUP
DISPLAY
[9] TRK GROUP
MODE:SEQUENTIAL
[801]
MODE:SEQUENTIAL
[801]
MEMBER 01:NONE
PROGRAMMING
PART 2 NOVEMBER 2001
TRK GROUP
TRK GROUP
HOME
PAGE
Table of
Contents
HELP