Samsung iDCS 500 Programming Manual page 59

iDCS 500
TECHNICAL MANUAL
MMC: 202
DESCRIPTION:
Used to change the passcodes for the following features: RING PLAN, DISA ALARM,
ALARM CLR, AA RECORD, and DELETE.
DIAL OPTION
0 RING PLAN
1 DISA ALARM
2 ALARM CLR
3 AA RECORD
4 N/A
5 DELETE
NOTE: The passcode is four digits long. Each digit can be 0-9.
PROGRAM KEYS
KEYPAD Used to enter passcodes
SPK Save data and advance to next MMC
ACTION
1. Press TRSF 202
Display shows
2. Press UP or DOWN key to make selection
Press RIGHT soft key to move cursor to
passcode entry
CHANGE FEATURE PASSCODE
DESCRIPTION
This is the passcode required to place the system in
different ring plans (RP) or change the ring time
override (RTO).
This is the passcode required to clear a DISA ALARM
generated when the number of DISA attempts are
exceeded.
This is the passcode required to clear an Alarm
Sensor.
This is the passcode required to record prompts for
use with the AA ports on the Auto Attendant (DAAUP)
card.
Hotel / Motel feature passcode, required to delete
entries from a guest or meeting room bill.
PROGRAMMING
PART 2 SEPTEMBER 2003
DISPLAY
CHANGE PASSCODE
RING PLAN :0000
CHANGE PASSCODE
AA RECORD :4321
HOME
PAGE
Table of
Contents
HELP