Samsung iDCS 500 Programming Manual page 183

iDCS 500
TECHNICAL MANUAL
MMC: 500
DESCRIPTION:
Used to set the values of the system counters. The counters are listed below with a
brief description of each.
0 ALARM REM. CNTER
1 AUTO RDL COUNTER
2 DISA CALL COUNTER
3 DISA LOCK CENTER
4 NEW CALL COUNTER
5 UCDS VISUAL ALARM
6 UCDS AUDIO ALARM
7 UCD CS LEVEL 1
8 UCD CS LEVEL 2
SYSTEM-WIDE COUNTERS
The number of times that an alarm reminder will ring
a station before cancelling. RANGE = 1-99. (Also
used for wake up calls).
The number of times the system will redial an outside
number after the auto redial feature has been
activated. RANGE = 1-99.
Sets the maximum number of intercom calls that can
be made after accessing a DISA line. RANGE = 1-99.
Number of attempts the system will allow to
incorrectly access a DISA line before locking out the
DISA line. RANGE =1-99
Number of times the system will allow a user to signal
New Call on a
RANGE = 1-99.
Used to set the Visual alarm threshold. It is triggered
when the number of calls waiting to be answered in
the UCD group reaches this value. RANGE = 0-25.
Used to set the Audio alarm threshold. It is triggered
when the number of calls waiting to be answered in
the UCD group reaches this value. RANGE = 0-25.
Provides call wait indication level 1 if number of calls
waiting to be answered in UCD group reaches this
value. RANGE = 0-25.
Provides call wait indication level 2 if number of calls
waiting to be answered in UCD group reaches this
value. RANGE = 0-25.
PROGRAMMING
PART 2 SEPTEMBER 2003
C.O. line during
HOME
PAGE
Table of
Contents
HELP
one call.