Linking The Ai/Di Alarm With The Alarm Beacon; Optional) Setting Device Performance Parameters - Huawei ECC800 User Manual

ECC800 Data Center Controller
User Manual

6.1.2 Linking the AI/DI Alarm with the Alarm Beacon

Prerequisites
The alarm beacon is connected to the DO port on the ECC800.
Context
After the AI/DI alarm is linked with the alarm beacon, if smoke is detected inside the smart
module, the alarm beacon connecting to the corresponding DO port will generate an audible
and visual alarm.
This section describes how to set an alarm linkage by linking output dry contact of the smoke
DI alarm on the AI/DI_3 sensor to the DO2 port.
Procedure
Step 1 Choose System Settings > Alarm Parameter Settings > Alarm Linkage.
Step 2 Select ECC800 for Device Type, select Device Type or Device for Linkage type, and click
Confirm.
Step 3 Click Select in the Output Dry Contact list for Smoke DI alarm. On the Set Dry Contact
Outputs(ECC800) page, set DO2 to Yes and click OK.
Step 4 Click Select in the loudspeaker list for Smoke DI alarm. On the Please set the
sound(ECC800) page, set loudspeaker to Yes and click OK.
----End

6.2 (Optional) Setting Device Performance Parameters

Context



Procedure
Step 1 Choose System Settings > Performance Parameters.
Step 2 Set device performance parameters on the Performance Parameters page. Select the device
to be set under Device Type and click Confirm. All performance parameters of the selected
device are displayed.
Issue 07 (2020-03-16)
Select ECC800 from the Device Name list if you have selected Device for Linkage type, and click
Confirm.
Setting device performance parameters will affect the storage of device performance
data.
The device performance data threshold can be changed to determine whether to record
the intermediate status parameters of device performance data.
If you need to change parameters such as Collecting Data, refer to the following
procedure.
Copyright © Huawei Technologies Co., Ltd.
6 Feature Description
161