Feature Telnet - Cisco Nexus 7000 Series Command Reference Manual

feature telnet

feature telnet
To enable the Telnet server for a virtual device context (VDC), use the feature telnet command. To disable
the Telnet server, use the no form of this command.
feature telnet
no feature telnet
Syntax Description
This command has no arguments or keywords.
Command Default
Disabled
Command Modes
Global configuration
Command History
Release
4.1(2)
Usage Guidelines
This command does not require a license.
Examples This example shows how to enable the Telnet server:
switch# configure terminal
switch(config)# feature telnet
This example shows how to disable the Telnet server:
switch# configure terminal
switch(config)# no feature telnet
XML interface to system may become unavailable since ssh is disabled
Related Commands
Command
show feature
show telnet server
Cisco Nexus 7000 Series Security Command Reference
336
Modification
This command was introduced to replace the telnet server enable
command.
Description
Displays the enable status of the features.
Displays the SSH server key information.
F Commands