Cisco Nexus 7000 Series Security Command Reference - Cisco Nexus 7000 Series Command Reference Manual

C Commands
The speaker calculates the keepalive time to one-third of the selected hold time by default, unless a different
keepalive time is locally configured.
Examples The following example shows how to configure the hold time period of a listener device for a minimum of
300 seconds and a maximum of 500 seconds:
switch# configure terminal
switch(config)# cts sxp listener hold-time 300 500
Related Commands
Command
cts sxp enable
cts sxp speaker hold-time
show cts sxp
Description
Enables Cisco TrustSec SXP on a device.
Configures the hold time of a speaker device in an
SXPv4 network.
Displays the status of all Cisco TrustSec SXP
configurations.

Cisco Nexus 7000 Series Security Command Reference

cts sxp listener hold-time
181