Eou Revalidate (Global Configuration And Interface Configuration) - Cisco Nexus 7000 Series Command Reference Manual

E Commands

eou revalidate (global configuration and interface configuration)

To enable automatic periodic revalidation of Extensible Authentication Protocol over User Datagram Protocol
(EAPoUDP) sessions globally or for a specific interface, use the eou revalidate command. To revert to the
default, use the no form of this command.
eou revalidate
no eou revalidate
Syntax Description
This command has no arguments or keywords.
Command Default
Global configuration: Enabled
Interface configuration: Global configuration value
Command Modes
Global configuration Interface configuration
Command History
Release
4.0(1)
Usage Guidelines
The automatic revalidation setting for an interface overrides the global setting for automatic revalidation.
Note The Cisco NX-OS software supports an eou revalidate command in EXEC configuration mode. To use
an EXEC-level eou revalidate command in global configuration mode, include the required keywords.
You must use the feature eou command before you configure EAPoUDP.
This command does not require a license.
Examples This example shows how to disable global automatic revalidation of EAPoUDP sessions:
switch# config t
switch(config)# no eou revalidate
This example shows how to enable global automatic revalidation of EAPoUDP sessions:
switch# config t
switch(config)# eou revalidate
This example shows how to disable automatic revalidation of EAPoUDP sessions for an interface:
switch# config t
switch(config)# no eou revalidate
eou revalidate (global configuration and interface configuration)
Modification
This command was introduced.
Cisco Nexus 7000 Series Security Command Reference
307