Policy-Map Type Control-Plane - Cisco Nexus 7000 Series Command Reference Manual

policy-map type control-plane

policy-map type control-plane
To create or specify a control plane policy map and enter policy map configuration mode, use the policy-map
type control-plane command. To delete a control plane policy map, use the no form of this command.
policy-map type control-plane policy-map-name
no policy-map type control-plane policy-map-name
Syntax Description
policy-map-name
Command Default
None
Command Modes
Global configuration
Command History
Release
4.0(1)
Usage Guidelines
You can use this command only in the default VDC.
This command does not require a license.
Examples
This example shows how to specify a control plane policy map and enter policy map configuration mode:
switch# configure terminal
switch(config)# policy-map type control-plane PolicyMapA
switch(config-pmap)#
This example shows how to delete a control plane policy map:
switch# configure terminal
switch(config)# no policy-map type control-plane PolicyMapA
Related Commands
Command
show policy-map type control-plane
Cisco Nexus 7000 Series Security Command Reference
592
Name of the class map. The name is alphanumeric,
case sensitive, and has a maximum of 64 characters.
Modification
This command was introduced.
Description
Displays configuration information for control plane
policy maps.
P Commands