P Commands
Command Default
None
Command Modes
Policy map configuration
Command History
Release
4.0(1)
Usage Guidelines
You can use this command only in the default VDC.
This command does not require a license.
Examples
This example shows how to specify a control plane policy map and enter policy map configuration mode:
switch# configure terminal
switch(config)# policy-map type control-plane PolicyMapA
switch(config-pmap)# class ClassMapA
switch(config-pmap-c)# police cir 2000 kbps
This example shows how to delete a control plane policy map:
switch# configure terminal
switch(config)# policy-map type control-plane PolicyMapA
switch(config-pmap)# class ClassMapA
switch(config-pmap-c)# no police 2000 kbps
Related Commands
Command
class (policy map)
show policy-map type control-plane
Modification
This command was introduced.
Description
Specifies a control plane class map for a control plane
policy map and enters policy map class configuration
mode.
Displays configuration information for control plane
policy maps.
Cisco Nexus 7000 Series Security Command Reference
police (policy map)
589