A Commands
aaa group server ldap
To create a Lightweight Directory Access Protocol (LDAP) server group and enter LDAP server group
configuration mode , use the aaa group server ldap command. To delete an LDAP server group, use the no
form of this command.
aaa group server ldap group-name
no aaa group server ldap group-name
Syntax Description
group-name
Command Default
None
Command Modes
Global configuration
Supported User Roles
network-admin
vdc-admin
Command History
Release
5.0(2)
Usage Guidelines
You must use the feature ldap command before you configure LDAP.
This command does not require a license.
Examples
This example shows how to create an LDAP server group and enter LDAP server configuration mode:
switch# configure terminal
switch(config)# aaa group server ldap LdapServer
switch(config-ldap)#
This example shows how to delete an LDAP server group:
switch# configure terminal
switch(config)# no aaa group server ldap LdapServer
LDAP server group name. The name is alphanumeric
and case-sensitive. The maximum length is 64
characters.
Modification
This command was introduced.
Cisco Nexus 7000 Series Security Command Reference
aaa group server ldap
47