Cisco Nexus 7000 Series Command Reference Manual page 614

police (policy map)
bytes
kbytes
mbytes
ms
packets
us
conform
drop
set-cos-transmit cos-value
set-dscp-transmit dscp-value
set-prec-transmit prec-value
transmit
exceed
set dscp dscp table cir-markdown-map
violate
set dscp dscp table pir-markdown-map
pir pir-rate
be
extended-burst-size
Cisco Nexus 7000 Series Security Command Reference
588
(Optional) Specifies the units for a burst in bytes.
(Optional) Specifies the units for a burst in kilobytes.
(Optional) Specifies the units for a burst in megabytes.
(Optional) Specifies the units for a burst in
milliseconds.
(Optional) Specifies the units for a burst in packets.
(Optional) Specifies the units for a burst in
microseconds.
Configures an action when the traffic conforms to the
specified rates and bursts.
Specifies the drop action.
Specifies setting the class of service (CoS) value. The
range is from 0 to 7.
Specifies the differentiated services code point
(DSCP) value for IPv4 and IPv6 packets. The range
is from 0 to 63.
Specifies the precedence value for IPv4 and IPv6
packets. The range is from 0 to 7.
Specifies the transmit action.
Configures an action when the traffic exceeds the
specified rates and bursts.
Flags the packet on the CIR markdown map.
(Optional) Configures an action when the traffic
violates the specified rates and bursts.
Flags the packet on the PIR markdown map.
Specifies the PIR rate.
(Optional) Specifies the extended burst size.
Extended burst size. The range is from 1 to
512000000.
P Commands