Show Data-Corruption - Cisco Nexus 7000 Series Command Reference Manual

Show Commands

show data-corruption

To display data inconsistency errors, use the show data-corruption command.
show data-corruption
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
Release
8.0(1)
Usage Guidelines
None.
Examples This example shows how to display the data inconsistency errors:
switch# show data-corruption
DATACORRUPTION-DATAINCONSISTENCY: -Traceback= vmtracker libhmm_dll.so+0x1b4d0 libhmm.so+0x2cf0
libhmm_dll.so +0x1ba0a libhmm_dll.so+0x1c9e7 libhmm.so+0x2f49 +0x209d0
libvmtracker.so+0x4d586 libvmtracker.so+0x9b0c1 libvmtracker.so+0x43154 libvmtracker.so+0x42c
happened 20 times since Mon Feb 15 09:05:20 2016
DATACORRUPTION-DATAINCONSISTENCY: -Traceback= hmm +0x40faf +0xbf870 +0xc0b4c +0x40292
+0xa37fa +0xa9f29 +0xc05aa +0xc060e +0xc0765 +0x42c35 +0x2c339 librsw.so+0xacc33
libpthread.so.0+0x6b75 libc.so.6+0xee02e happened 1 time since Fri Feb 12 00:01:16 2016
Modification
This command was introduced.
Cisco Nexus 7000 Series Security Command Reference
show data-corruption
759