Eou Logging - Cisco Nexus 7000 Series Command Reference Manual

eou logging

eou logging
To enable Extensible Authentication Protocol over User Datagram Protocol (EAPoUDP) logging, use the eou
logging command. To disable EAPoUDP logging, use the no form of this command.
eou logging
no eou logging
Syntax Description
This command has no arguments or keywords.
Command Default
Global configuration: Disabled
Interface configuration: Global configuration setting
Command Modes
Global configuration Interface configuration
Command History
Release
4.0(1)
Usage Guidelines
The setting for EAPoUDP logging on an interface overrides the global setting.
You must use the feature eou command before you configure EAPoUDP.
This command does not require a license.
Examples This example shows how to enable global EAPoUDP logging:
switch# config t
switch(config)# eou logging
This example shows how to disable global EAPoUDP logging:
switch# config t
switch(config)# no eou logging
This example shows how to enable EAPoUDP logging for an interface:
switch# config t
switch(config)# interface ethernet 1/1
switch(config-if)# eou logging
This example shows how to disable EAPoUDP logging for an interface:
switch# config t
switch(config)# interface ethernet 1/1
switch(config-if)# no eou logging
Cisco Nexus 7000 Series Security Command Reference
298
Modification
This command was introduced.
E Commands