Cisco Nexus 7000 Series Command Reference Manual page 596

permit (IPv6)
ntp—Network Time Protocol (123)
pim-auto-rp—PIM Auto-RP (496)
rip—Routing Information Protocol (router, in.routed, 52)
snmp—Simple Network Management Protocol (161)
snmptrap—SNMP Traps (162)
sunrpc—Sun Remote Procedure Call (111)
syslog—System Logger (514)
tacacs—TAC Access Control System (49)
talk—Talk (517)
tftp—Trivial File Transfer Protocol (69)
time—Time (37)
who—Who service (rwho, 513)
xdmcp—X Display Manager Control Protocol (177)
Examples This example shows how to configure an IPv6 ACL named acl-lab13-ipv6 with rules permitting all TCP and
UDP traffic from the 2001:0db8:85a3:: and 2001:0db8:69f2:: networks to the 2001:0db8:be03:2112:: network:
switch# configure terminal
switch(config)# ipv6 access-list acl-lab13-ipv6
switch(config-ipv6-acl)# permit tcp 2001:0db8:85a3::/48 2001:0db8:be03:2112::/64
switch(config-ipv6-acl)# permit udp 2001:0db8:85a3::/48 2001:0db8:be03:2112::/64
switch(config-ipv6-acl)# permit tcp 2001:0db8:69f2::/48 2001:0db8:be03:2112::/64
switch(config-ipv6-acl)# permit udp 2001:0db8:69f2::/48 2001:0db8:be03:2112::/64
This example shows how to configure an IPv6 ACL named ipv6-eng-to-marketing with a rule that permits
all IPv6 traffic from an IPv6-address object group named eng_ipv6 to an IPv6-address object group named
marketing_group:
switch# configure terminal
switch(config)# ipv6 access-list ipv6-eng-to-marketing
switch(config-ipv6-acl)# permit ipv6 addrgroup eng_ipv6 addrgroup marketing_group
Related Commands
Command
deny (IPv6)
fragments
ipv6 access-list
object-group ipv6 address
object-group ip port
remark
show ipv6 access-list
Cisco Nexus 7000 Series Security Command Reference
570
Description
Configures a deny rule in an IPv6 ACL.
Configures how an IP ACL processes noninitial
fragments.
Configures an IPv6 ACL.
Configures an IPv6-address object group.
Configures an IP-port object group.
Configures a remark in an ACL.
Displays all IPv6 ACLs or one IPv6 ACL.
P Commands