Eou Allow Clientless - Cisco Nexus 7000 Series Command Reference Manual

eou allow clientless

eou allow clientless
To enable Extensible Authentication Protocol over User Datagram Protocol (EAPoUDP) posture validation
of clientless endpoint devices, use the eou allow clientless command. To disable posture validation of clientless
endpoint devices, use the no form of this command.
eou allow clientless
no eou allow clientless
Syntax Description
This command has no arguments or keywords.
Command Default
Disabled
Command Modes
Global configuration
Command History
Release
4.0(1)
Usage Guidelines
You must use the feature eou command before you configure EAPoUDP.
This command does not require a license.
Examples This example shows how to allow EAPoUDP posture validation of clientless endpoint devices:
switch# config t
switch(config)# eou allow clientless
This example shows how to prevent EAPoUDP posture validation of clientless endpoint devices:
switch# config t
switch(config)# no eou allow clientless
Related Commands
Command
feature eou
show eou
Cisco Nexus 7000 Series Security Command Reference
294
Modification
This command was introduced.
Description
Enables EAPoUDP.
Displays EAPoUDP information.
E Commands