Show Ipv6 Snooping Capture-Policy - Cisco Nexus 7000 Series Command Reference Manual

Show Commands

show ipv6 snooping capture-policy

To display message capture policies, use the show ipv6 snooping capture-policy command.
show ipv6 snooping capture-policy [interface type number]
Syntax Description
interface type number
Command Modes
Any command mode
Command History
Release
8.0(1)
Usage Guidelines
The show ipv6 snooping capture-policy command displays IPv6 first-hop message capture policies.
Examples The following example shows show ipv6 snooping capture-policy command output on the Ethernet 0/0
interface, on which the IPv6 Neighbor Discovery Protocol (NDP) Inspection and Router Advertisement (RA)
Guard features are configured:
switch# show ipv6 snooping capture-policy
Hardware policy registered on Et0/0
Protocol
ICMP
ICMP
ICMP
ICMP
ICMP
The table below describes the significant fields shown in the display.
Table 4: show ipv6 snooping capture-policy Field Descriptions
Field
Hardware policy registered on Fa4/11
Protocol
Protocol value Message
58 RS
58 RA
58 NS
58 NA
58 REDIR
(Optional) Displays first-hop message types on the
specified interface type and number.
Modification
This command was introduced.
Value Action Feature
85 punt RA Guard
punt ND Inspection
86 drop RA guard
punt ND Inspection
87 punt ND Inspection
88 punt ND Inspection
89 drop RA Guard
punt ND Inspection
Description
A hardware policy contains a programmatic access
list (ACL), with a list of access control entries
(ACEs).
The protocol whose packets are being inspected.
Cisco Nexus 7000 Series Security Command Reference
show ipv6 snooping capture-policy
821