Show Hardware Access-List Feature-Combo - Cisco Nexus 7000 Series Command Reference Manual

Show Commands

show hardware access-list feature-combo

To display the bank mapping matrix, use the show hardware access-list feature- combo command.
show hardware access-list {input| output} {interface| vlan} feature-combo features
Syntax Description
input
output
interface
vlan
feature-combo
features
Command Default
None
Command Modes
Any command mode
Command History
Release
6.2(10)
Usage Guidelines
This command does not require a license.
The following are the features you can enter:
• arp—Address Resolution Protocol
• bfd—Bidirectional Forwarding Detection
• cbts—Class-Based Tunnel Selection
• cts_impl_tunnel—CTS Implicit Tunnel
• dhcp—Dynamic Host Configuration Protocol
• erspan_dst—Encapsulated Remote Switched Port Analyzer (destination)
• erspan_src—Encapsulated Remote Switched Port Analyzer (source)
• lisp—Locator/ID Separation Protocol
show hardware access-list feature-combo
Displays input/ingress policies.
Displays output/egress policies..
Specifies interface.
Specifies VLAN.
Specifies the feature combination.
Specifies the features.
Modification
This command was introduced.
Cisco Nexus 7000 Series Security Command Reference
769