Eou Max-Retry - Cisco Nexus 7000 Series Command Reference Manual

eou max-retry

eou max-retry
To configure the maximum number of attempts for Extensible Authentication Protocol over User Datagram
Protocol (EAPoUDP) globally or for an interface, use the eou max-retry command. To revert to the default,
use the no form of this command.
eou max-retry count
no eou max-retry
Syntax Description
count
Command Default
Global configuration: 3
Interface configuration: global configuration value
Command Modes
Global configuration Interface configuration
Command History
Release
4.0(1)
Usage Guidelines
The maximum retries for an interface takes precedence over the globally configured value.
You must use the feature eou command before you configure EAPoUDP.
This command does not require a license.
Examples This example shows how to change the global maximum number of EAPoUDP retry attempts:
switch# config t
switch(config)# eou max-retry 2
This example shows how to revert to the default global maximum number of EAPoUDP retry attempts:
switch# config t
switch(config)# no eou max-retry
This example shows how to change the maximum number of EAPoUDP retry attempts for an interface:
switch# config t
switch(config) interface ethernet 1/1
switch(config-if)# eou max-retry 3
Cisco Nexus 7000 Series Security Command Reference
300
Maximum number of retry attempts. The range is
from 1 to 3.
Modification
This command was introduced.
E Commands