Cisco Nexus 7000 Series Command Reference Manual page 799

Show Commands
vpc-low
layer-3
control
glean
glean-fast
mtu
multicast
directly-connected
local-groups
rpf-leak
ttl
receive
Command Default
Displays all rate-limit statistics.
Command Modes
Any command mode
Command History
Release
6.2(2)
5.1(1)
5.0(2)
Specifies rate-limit statistics for Layer 2 control
packets over the virtual port channel (vPC) low queue.
(Optional) Displays Layer 3 packet rate limits.
Specifies rate-limit statistics for Layer 3 control
packets.
Specifies rate-limit statistics for Layer 3 glean
packets.
Specifies rate-limit statistics for Layer 3 glean
fast-path packets.
Specifies rate-limit statistics for Layer 3 maximum
transmission unit (MTU) packets.
Specifies Layer 3 multicast rate limits.
Specifies rate-limit statistics for Layer 3 directly
connected multicast packets.
Specifies rate-limit statistics for Layer 3 local group
multicast packets.
Specifies rate-limit statistics for Layer 3 reverse path
forwarding (RPF) leak multicast packets.
Specifies rate-limit statistics for Layer 3 time-to-live
(TTL) packets.
(Optional) Displays rate-limit statistics for receive
packets.
Modification
Added the glean-fast keyword.
Added the f1, rl-1, rl-2, rl-3, rl-4, rl-5, and module keywords.
Added the l2pt keyword.
Cisco Nexus 7000 Series Security Command Reference
show hardware rate-limiter
773