Cts Role-Based Monitor - Cisco Nexus 7000 Series Command Reference Manual

C Commands

cts role-based monitor

To configure RBACL monitor, use the cts role-based monitor command. To revert to the default, use the
no form of this command.
cts role-based monitor {all| enable| permissions from| {sgt| unknown }| to | {dgt| unknown}}[ ipv4 | ipv6
]
no cts role-based monitor {all| enable| permissions from| {sgt| unknown }| to | {dgt| unknown}}[ ipv4 |
ipv6 ]
Syntax Description
all
enable
permission
sgt
dgt
unknown
ipv4
ipv6
Command Default
Disabled
Command Modes
Global configurationVRF configuration
Command History
Release
7.3(0)D1(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
Enables monitoring permissions for all source groups
to all destination groups.
Enables RBACL monitor mode.
Specifies the range for the SGT and DGT that needs
to be monitored.
Specifies any SGT.
Specifies the Specifies the destination SGT.
Specifies an unknown SGT.
Specifies the IPv4 protocol version.
Specifies the IPv6 protocol version.
Modification
This command was introduced.
Cisco Nexus 7000 Series Security Command Reference
cts role-based monitor
167