Hardware Access-List Resource Feature Bank-Mapping - Cisco Nexus 7000 Series Command Reference Manual

H Commands

hardware access-list resource feature bank-mapping

To enable access control list (ACL) ternary control address memory (TCAM) bank mapping for feature groups
and classes, use the hardware access-list resource feature bank-mapping command. To disable ACL
TCAM bank mapping, use the no form of the command.
hardware access-list resource feature bank-mapping
no hardware access-list resource feature bank-mapping
Syntax Description
This command has no arguments or keywords.
Command Default
Disabled
Command Modes
Global configuration
Command History
Release
6.2(2)
Usage Guidelines
This command is available only in the default virtual device context (VDC) but applies to all VDCs.
F1 Series modules do not support ACL TCAM bank mapping. Resource pooling and ACL TCAM bank
mapping cannot be enabled at the same time.
Examples
This example shows how to enable ACL TCAM bank mapping for feature groups and classes:
switch(config)# hardware access-list resource feature bank-mapping
Related Commands
Command
show system internal access-list feature bank-class
map
hardware access-list resource feature bank-mapping
Modification
This command was introduced.
Description
Displays the ACL TCAM bank mapping feature group
and class combination tables.
Cisco Nexus 7000 Series Security Command Reference
351