Show Cts L3 Interface - Cisco Nexus 7000 Series Command Reference Manual

Hide thumbs Also See for Nexus 7000 Series:
Table of Contents

Advertisement

Show Commands

show cts l3 interface

To display the Layer 3 Cisco TrustSec configuration on the interfaces, use the show cts l3 interface command.
show cts l3 interface
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any configuration mode
Command History
Release
4.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
This command requires the Advanced Services license.
Examples
This example shows how to display the Layer 3 Cisco TrustSec configuration for the interfaces:
switch# show cts l3 interface
Related Commands
Command
feature cts
Modification
This command was introduced.
Description
Enables the Cisco TrustSec feature.
Cisco Nexus 7000 Series Security Command Reference
show cts l3 interface
739

Advertisement

Table of Contents
loading

Table of Contents