Cisco Nexus 7000 Series Command Reference Manual page 475

Hide thumbs Also See for Nexus 7000 Series:

Table of Contents

ipv6 nd raguard attach-policy

If no VLAN is specified (which is equal to entering the vlan all keywords after the policy-name argument),

RA guard traffic from all VLANs on the port is analyzed.

If specified, the VLAN parameter is either a single VLAN number from 1 through 4094 or a range of VLANs

described by two VLAN numbers, the lesser one first, separated by a dash. Do not enter any spaces between

comma-separated vlan parameters or in dash-specified ranges; for example, vlan 1-100,200,300-400.

In the following example, the IPv6 RA guard feature is applied on GigabitEthernet interface 0/0:

switch(config)# interface GigabitEthernet 0/0

switch(config-if)# ipv6 nd raguard attach-policy

Cisco Nexus 7000 Series Security Command Reference