Cisco Nexus 7000 Series Security Command Reference - Cisco Nexus 7000 Series Command Reference Manual

clear port-security
Usage Guidelines
You must enable port security by using the feature port-security command before you can use the clear
port-security command.
This command does not require a license.
Examples This example shows how to remove dynamically learned, secure MAC addresses from the Ethernet 2/1
interface:
switch# configure terminal
switch(config)# clear port-security dynamic interface ethernet 2/1
This example shows how to remove the dynamically learned, secure MAC address 0019.D2D0.00AE:
switch# configure terminal
switch(config)# clear port-security dynamic address 0019.D2D0.00AE
Related Commands
Command
debug port-security
feature port-security
show port-security
switchport port-security

Cisco Nexus 7000 Series Security Command Reference

116
Description
Provides debugging information for port security.
Enables port security globally.
Shows information about port security.
Enables port security on a Layer 2 interface.
C Commands