Show Copp Profile - Cisco Nexus 7000 Series Command Reference Manual

Show Commands

show copp profile

To display the details of the Control Plane Policing (CoPP) best practice policy, along with the classes and
policer values, use the show copp profile command.
show copp profile {lenient| moderate| strict}
Syntax Description
lenient
moderate
strict
Command Default
None
Command Modes
Any command mode
Command History
Release
5.2(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to display the details of the CoPP best practice policy, along with the classes and
policer values:
switch# show copp profile moderate
ip access-list copp-system-p-acl-bgp
permit tcp any gt 1024 any eq bgp
permit tcp any eq bgp any gt 1024
ipv6 access-list copp-system-p-acl-bgp6
permit tcp any gt 1024 any eq bgp
permit tcp any eq bgp any gt 1024
ip access-list copp-system-p-acl-cts
permit tcp any any eq 64999
permit tcp any eq 64999 any
ip access-list copp-system-p-acl-dhcp
permit udp any eq bootpc any
permit udp any neq bootps any eq bootps
ip access-list copp-system-p-acl-dhcp-relay-response
permit udp any eq bootps any
permit udp any any eq bootpc
ip access-list copp-system-p-acl-eigrp
permit eigrp any any
ip access-list copp-system-p-acl-ftp
permit tcp any any eq ftp-data
Displays the lenient profile.
Displays the moderate profile.
Displays the strict profile.
Modification
This command was introduced.
Cisco Nexus 7000 Series Security Command Reference
show copp profile
719