Show Cts Sxp Connection - Cisco Nexus 7000 Series Command Reference Manual

show cts sxp connection

show cts sxp connection
To display the Cisco TrustSec Security Group Tag (SGT) Exchange Protocol (SXP) connections information,
use the show cts sxp connection command.
show cts sxp connection
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any configuration mode
Command History
Release
4.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
This command requires the Advanced Services license.
Examples This example shows how to display the Cisco TrustSec Security Group Tag (SGT) Exchange Protocol (SXP)
connections information:
switch# show cts sxp connection
PEER_IP_ADDR
30.1.1.3
Related Commands
Command
feature cts
Cisco Nexus 7000 Series Security Command Reference
758
Modification
This command was introduced.
VRF PEER_SXP_MODE
default listener
SELF_SXP_MODE CONNECTION STATE
speaker connected
Description
Enables the Cisco TrustSec feature.
Show Commands
VERSION
3