Cisco Nexus 7000 Series Command Reference Manual page 457

I Commands
Examples
This example shows how to configure loose Unicast RPF checking on an interface:
switch# configure terminal
switch(config)# interface ethernet 2/3
switch(config-if)# ip verify unicast source reachable-via any
This example shows how to configure strict Unicast RPF checking on an interface:
switch# configure terminal
switch(config)# interface ethernet 2/3
switch(config-if)# ip verify unicast source reachable-via rx
Related Commands
Command
show ip interface ethernet
show running-config interface ethernet
show running-config ip
show startup-config interface ethernet
show startup-config ip
ip verify unicast source reachable-via
Description
Displays the IP-related information for an interface.
Displays the interface configuration in the running
configuration.
Displays the IP configuration in the running
configuration.
Displays the interface configuration in the startup
configuration.
Displays the IP configuration in the startup
configuration.
Cisco Nexus 7000 Series Security Command Reference
431