Description (User Role) - Cisco Nexus 7000 Series Command Reference Manual

description (user role)

description (user role)
To configure a description for a user role, use the description command. To revert to the default, use the no
form of this command.
description text
no description
Syntax Description
text
Command Default
None
Command Modes
User role configuration
Command History
Release
4.0(1)
Usage Guidelines
You can include blank spaces in the user role description text.
This command does not require a license.
Examples This example shows how to configure the description for a user role:
switch# configure terminal
switch(config)# role name MyRole
switch(config-role)# description User role for my user account.
This example shows how to remove the description from a user role:
switch# configure terminal
switch(config)# role name MyRole
switch(config-role)# no description
Related Commands
Command
role name
show role
Cisco Nexus 7000 Series Security Command Reference
266
Text string that describes the user role. The string is
alphanumeric. The maximum length is 128 characters.
Modification
This command was introduced.
Description
Creates or specifies a user role and enters user role
configuration mode.
Displays user role information.
D Commands