Show Port-Security Address - Cisco Nexus 7000 Series Command Reference Manual

Show Commands

show port-security address

To show information about MAC addresses secured by the port security feature, use the show port-security
address command.
show port-security address [interface {port-channel channel-number| ethernet slot/port}]
Syntax Description
interface
port-channel channel-number
ethernetslot/port
Command Default
None
Command Modes
Any command mode
Command History
Release
4.2(1)
4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to use the show port-security address command to view information about all
MAC addresses secured by port security:
switch# show port-security address
Total Secured Mac Addresses in System (excluding one mac per port)
Max Addresses limit in System (excluding one mac per port) : 8192
----------------------------------------------------------------------
----------------------------------------------------------------------
Vlan
----
1
1
======================================================================
switch#
Modification
Support for Layer 2 port-channel interfaces was added.
This command was introduced.
Secure Mac Address Table
Mac Address
----------- ------
0054.AAB3.770F STATIC
00EE.378A.ABCE STATIC
(Optional) Limits the port-security MAC address
information to a specific interface.
Specifies a Layer 2 port-channel interface. The
channel-number argument can be a whole number
from 1 to 4096.
Specifies an Ethernet interface.
Type Ports
-----
port-channel1
Ethernet1/4
Cisco Nexus 7000 Series Security Command Reference
show port-security address
: 0
Remaining Age
(mins)
-------------
0
0
853