Show Cts - Cisco Nexus 7000 Series Command Reference Manual

show cts

show cts
To display the global Cisco TrustSec configuration, use the show cts command.
show cts
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any configuration mode
Command History
Release
4.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
This command requires the Advanced Services license.
Examples This example shows how to display the Cisco TrustSec global configuration:
switch# show cts
CTS Global Configuration
==============================
CTS support
CTS device identity
CTS caching support
Number of CTS interfaces in
Related Commands
Command
feature cts
Cisco Nexus 7000 Series Security Command Reference
732
: enabled
: Device1
: disabled
DOT1X mode : 0
Manual mode : 0
Modification
This command was introduced.
Description
Enables the Cisco TrustSec feature.
Show Commands