Cisco Nexus 7000 Series Command Reference Manual page 405

I Commands
Examples
This example shows how to enter IP access list configuration mode for an IPv4 ACL named ip-acl-01:
switch# configure terminal
switch(config)# ip access-list ip-acl-01
switch(config-acl)#
Command
deny (IPv4)
ip access-group
ip port access-group
permit (IPv4)
show ip access-lists
statistics per-entry
Description
Configures a deny rule in an IPv4 ACL.
Applies an IPv4 ACL to an interface as a router ACL.
Applies an IPv4 ACL to an interface as a port ACL.
Configures a permit rule in an IPv4 ACL.
Displays all IPv4 ACLs or a specific IPv4 ACL.
Enables collection of statistics for each entry in an
ACL.
Cisco Nexus 7000 Series Security Command Reference
ip access-list
379