Ldap-Server Host - Cisco Nexus 7000 Series Command Reference Manual

Hide thumbs Also See for Nexus 7000 Series:
Table of Contents

Advertisement

L Commands

ldap-server host

To configure Lightweight Directory Access Protocol (LDAP) server host parameters, use the ldap-server
host command. To revert to the defaults, use the no form of this command.
ldap-server host {ipv4-address| ipv6-address| host-name} [enable-ssl] [port tcp-port [timeout seconds]]
[rootDN root-name [password password] [port tcp-port [timeout seconds]| [timeout seconds]]] [test rootDN
root-name [idle-time minutes| password password [idle-time minutes]| username name [password password
[idle-time minutes]]]] [timeout seconds]
noldap-server host {ipv4-address| ipv6-address| host-name} [enable-ssl] [port tcp-port [timeout seconds]]
[rootDN root-name [password password] [port tcp-port [timeout seconds]| [timeout seconds]]] [test rootDN
root-name [idle-time minutes| password password [idle-time minutes]| username name [password password
[idle-time minutes]]]] [timeout seconds]
Syntax Description
ipv4-address
ipv6-address
host-name
enable-ssl
port tcp-port
timeout seconds
rootDN root-name
password password
test
idle-time minutes
Server IPv4 address in the A.B.C.D format.
Server IPv6 address in the X:X:X:X format.
Server name. The name is alphanumeric, case
sensitive, and has a maximum of 256 characters.
(Optional) Ensures the integrity and confidentiality
of the transferred data by causing the LDAP client to
establish a Secure Sockets Layer (SSL) session before
sending the bind or search request.
(Optional) Specifies the TCP port to use for LDAP
messages to the server. The range is from 1 to 65535.
(Optional) Specifies the timeout interval for the
server. The range is from 1 to 60 seconds.
(Optional) Specifies the root designated name (DN)
for the LDAP server database. You can enter up to
128 alphanumeric characters for the root name.
(Optional) Specifies the bind password for the root.
(Optional) Configures parameters to send test packets
to the LDAP server.
Specifies the time interval (in minutes) for monitoring
the server. The range is from 1 to 1440 minutes.
Cisco Nexus 7000 Series Security Command Reference
ldap-server host
481

Advertisement

Table of Contents
loading

Table of Contents