Show Ipv6 Snooping Policies - Cisco Nexus 7000 Series Command Reference Manual

show ipv6 snooping policies

show ipv6 snooping policies
To display information about the configured policies and the interfaces to which they are attached, use the
show ipv6 snooping policies command.
show ipv6 snooping policies {interface type number| vlan vlan-id}
Syntax Description
interface
vlan vlan-id
Command Modes
Any command mode
Command History
Release
8.0(1)
Usage Guidelines
The show ipv6 snooping policies command displays all policies that are configured and lists the interfaces
to which they are attached.
Examples The following example shows information about all policies configured:
switch# show ipv6 snooping policies
NDP inspection policies configured:
Policy
------
trusted
untrusted
RA guard policies configured:
Policy
------
host
router
The table below describes the significant fields shown in the display.
Cisco Nexus 7000 Series Security Command Reference
826
type number
Interface Vlan
--------- ----
Et0/0 all
Et1/0 all
Et2/0 all
Interface Vlan
--------- ----
Et0/0 all
Et1/0 all
Et2/0 all
Displays policies that match the specified interface
type and number.
Displays first-hop packets that match the specified
VLAN ID.
Modification
This command was introduced.
Show Commands