Show Telnet Server - Cisco Nexus 7000 Series Command Reference Manual

show telnet server

show telnet server
To display the Telnet server status for a virtual device context (VDC), use the show telnet server command.
show telnet server
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to display the Telnet server status:
switch# show telnet server
telnet service enabled
Related Commands
Command
telnet server enable
Cisco Nexus 7000 Series Security Command Reference
924
Modification
This command was introduced.
Description
Enables the Telnet server.
Show Commands