Aaa Authentication Cts Default Group - Cisco Nexus 7000 Series Command Reference Manual

A Commands

aaa authentication cts default group

To configure the default authentication, authorization, and accounting (AAA) RADIUS server groups for
Cisco TrustSec authentication, use the aaa authentication cts default group command. To remove a server
group from the default AAA authentication server group list, use the no form of this command.
aaa authentication cts default group group-list
no aaa authentication cts default group group-list
Syntax Description
group-list
Command Default
None
Command Modes
Global configuration
Command History
Release
4.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
The group-list refers to a set of previously defined RADIUS servers. Use the radius-server host command
to configure the host servers. Use the aaa group server command to create a named group of servers.
Use the show aaa groups command to display the RADIUS server groups on the device.
If you specify more that one server group, the Cisco NX-OS software checks each group in the order that you
specify in the list.
This command requires the Advanced Services license.
Examples This example shows how to configure the default AAA authentication RADIUS server group for Cisco
TrustSec:
switch# configure terminal
swtich(config)# aaa authentication cts default group RadGroup
Space-separated list of RADIUS server groups that
can include the following:
• radius for all configured RADIUS servers.
• Any configured RADIUS server group name.
The maximum number of names in the list is eight.
Modification
This command was introduced.
Cisco Nexus 7000 Series Security Command Reference
aaa authentication cts default group
19