Show Cts Role-Based Policy - Cisco Nexus 7000 Series Command Reference Manual

Show Commands

show cts role-based policy

To display the global Cisco TrustSec security group access control list (SGACL) policies, use the show cts
role-based policy command.
show cts role-based policy [sgt{sgt-value| any| unknown}| dgt{dgt-value| any| unknown}| configured|
downloaded| monitored]
Syntax Description
sgt
sgt-value
any
unknown
dgt
dgt-value
configured
downloaded
monitored
Command Default
None
Command Modes
Any configuration mode.
Command History
Release
8.0(1)
4.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
This command requires the Advanced Services license.
Specifies the source security group tag (SGT).
Source SGT value. The range is from 0 to 65535.
Specifies any SGT or DGT.
Specifies an unknown SGT or DGT.
Specifies the destination security group tag (DGT).
Destination SGT value. The range is from 0 to 65535.
Displays the SGACLs configured by using CLI.
Displays the SGACLs downloaded from ISE.
Displays the monitored SGACLs.
Modification
The sgt, dgt, configured, downloaded, and monitored keywords were added.
Additionally, the command output was updated.
This command was introduced.
Cisco Nexus 7000 Series Security Command Reference
show cts role-based policy
749