Cisco Nexus 7000 Series Command Reference Manual page 644

remark
Usage Guidelines
This command does not require a license.
The remark argument can be up to 100 characters. If you enter more than 100 characters for the remark
argument, the device accepts the first 100 characters and drops any additional characters.
Examples
This example shows how to create a remark in an IPv4 ACL and display the results:
switch# configure terminal
switch(config)# ip access-list acl-ipv4-01
switch(config-acl)# 100 remark this ACL denies the marketing department access to the lab
switch(config-acl)# show access-list acl-ipv4-01
IP access list acl-ipv4-01
100 remark this ACL denies the marketing department access to the lab
ciscobox(config-acl)#
Related Commands
Command
ip access-list
ipv6 access-list
mac access-list
show access-list
statistics per-entry
Cisco Nexus 7000 Series Security Command Reference
618
Description
Configures an IPv4 ACL.
Configures an IPv6 ACL
Configures a MAC ACL.
Displays all ACLs or one ACL.
Enables collection of statistics for each entry in an
ACL.
R Commands