Aaa Accounting Dot1X - Cisco Nexus 7000 Series Command Reference Manual

A Commands

aaa accounting dot1x

To configure authentication, authorization, and accounting (AAA) methods for accounting for 802.1X
authentication, use the aaa accounting dot1x command. To revert to the default, use the no form of this
command.
aaa accounting dot1x {group group-list| local}
no aaa accounting dot1x {group group-list| local}
Syntax Description
group
group-list
local
Command Default
local
Command Modes
Global configuration
Command History
Release
4.0(1)
Usage Guidelines
The group group-list methods refer to a set of previously defined RADIUS servers. Use the radius-server
host command to configure the host servers. Use the aaa group server command to create a named group
of servers.
Use the show aaa groups command to display the RADIUS server groups on the device.
If you specify the group method, the local method, or both, and they fail, then the accounting authentication
fails.
If you specify more that one server group, the Cisco NX-OS software checks each group in the order that you
specify in the list.
This command does not require a license.
Specifies to use a server group for accounting.
Space-separated list of RADIUS server groups that
can include the following:
• radius for all configured RADIUS servers.
• Any configured RADIUS server group name.
The maximum number of names in the list is eight.
Specifies to use the local database for accounting.
Modification
This command was introduced.
Cisco Nexus 7000 Series Security Command Reference
aaa accounting dot1x
17