Show Dot1X - Cisco Nexus 7000 Series Command Reference Manual

show dot1x

show dot1x
To display the 802.1X feature status, use the show dot1x command.
show dot1x
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
Release
4.0(1)
Usage Guidelines
You must enable the 802.1X feature by using the feature dot1x command before using this command.
This command does not require a license.
Examples This example shows how to display the 802.1X feature status:
switch# show dot1x
Dot1x Protocol Version 2
Related Commands
Command
feature dot1x
Cisco Nexus 7000 Series Security Command Reference
760
Sysauthcontrol Enabled
Modification
This command was introduced.
Description
Enables the 802.1X feature.
Show Commands