Set Dscp (Policy Map Class) - Cisco Nexus 7000 Series Command Reference Manual

set dscp (policy map class)

set dscp (policy map class)
To set the differentiated services code point (DSCP) value for IPv4 and IPv6 packets in a control plane policy
map, use the set dscp command. To revert to the default, use the no form of this command.
set dscp [tunnel] {dscp-value| af11| af12| af13| af21| af22| af23| af31| af32| af33| af41| af42| af43| cs1| cs2|
cs3| cs4| cs5| cs6| cs7| ef| default}
no set dscp [tunnel] {dscp-value| af11| af12| af13| af21| af22| af23| af31| af32| af33| af41| af42| af43| cs1|
cs2| cs3| cs4| cs5| cs6| cs7| ef| default}
Syntax Description
tunnel
dscp-value
af11
af12
af13
af21
af22
af23
af31
af32
af33
af41
af42
af43
cs1
cs2
cs3
Cisco Nexus 7000 Series Security Command Reference
656
(Optional) Sets DSCP in a tunnel encapsulation.
Numerical value of CoS in the control plane policy
map. The range is from 0 to63.
Specifies assured forwarding 11 DSCP (001010).
Specifies assured forwarding 12 DSCP (001100).
Specifies assured forwarding 13 DSCP (001110).
Specifies assured forwarding 21 DSCP (010010).
Specifies assured forwarding 22 DSCP (010100).
Specifies assured forwarding 23 DSCP (010110).
Specifies assured forwarding 31 DSCP (011010).
Specifies assured forwarding 32 DSCP (011100).
Specifies assured forwarding 33 DSCP (011110).
Specifies assured forwarding 41 DSCP (100010).
Specifies assured forwarding 42 DSCP (100100).
Specifies assured forwarding 43 DSCP (100110).
Specifies class selector 1 (precedence 1) DSCP
(001000).
Specifies class selector 2 (precedence 2) DSCP
(010000).
Specifies class selector 3 (precedence 3) DSCP
(011000).
S Commands