Show System Internal Access-List Globals - Cisco Nexus 7000 Series Command Reference Manual

show system internal access-list globals

show system internal access-list globals
To display the access control list (ACL) ternary content addressable memory (TCAM) common information
along with the bank chaining mode, use the show system internal access-list globals command.
show system internal access-list globals
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
Release
7.3(0)D1(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to display the bank chaining mode:
switch# show system internal access-list globals
slot
=======
Default ACL
Bank Chaining : VLAN-VLAN
Seq Feat Model : NO_DENY_ACE_SUPPORT
This pltfm supports seq feat model
Bank Class Model : DISABLED
This pltfm supports bank class model
Fabric path DNL : DISABLED
Seq Feat Model : NO_DENY_ACE_SUPPORT
This pltfm supports seq feat model
L4 proto CAM extend : DISABLED
This pltfm supports L4 proto CAM extend
MPLS Topmost As Pipe Mode : DISABLED
This pltfm supports mpls topmost as pipe mode
LOU Threshold Value : 5
slot
=======
Atomic Update : ENABLED
Default ACL
Bank Chaining : PORT-VLAN
Seq Feat Model : NO_DENY_ACE_SUPPORT
This pltfm supports seq feat model
Bank Class Model : DISABLED
This pltfm supports bank class model
Fabric path DNL : DISABLED
Seq Feat Model : NO_DENY_ACE_SUPPORT
This pltfm supports seq feat model
Cisco Nexus 7000 Series Security Command Reference
914
2
Atomic Update : ENABLED
: DENY
3
: DENY
Modification
This command was introduced.
Show Commands