Aaa User Default-Role - Cisco Nexus 7000 Series Command Reference Manual

A Commands

aaa user default-role

To allow remote users who do not have a user role to log in to the device through RADIUS or TACACS+
using a default user role, use the aaa user default-role command. To disable default user roles for remote
users, use the no form of this command.
aaa user default-role
no aaa user default-role
Syntax Description
This command has no arguments or keywords.
Command Default
Enabled
Command Modes
Global configuration
Command History
Release
4.0(3)
Usage Guidelines
You can enable or disable this feature for the virtual device context (VDC) as needed. For the default VDC,
the default role is network-operator. For nondefault VDCs, the default VDC is vdc-operator. When you disable
the AAA default user role feature, remote users who do not have a user role cannot log in to the device.
This command does not require a license.
Examples This example shows how to enable default user roles for AAA authentication of remote users:
switch# configure terminal
switch(config)# aaa user default-role
This example shows how to disable default user roles for AAA authentication of remote users:
switch# configure terminal
switch(config)# no aaa user default-role
Related Commands
Command
show aaa user default-role
Modification
This command was introduced.
Description
Displays the status of AAA default user role feature.
Cisco Nexus 7000 Series Security Command Reference
aaa user default-role
51